Search Results

Standard

General Requirements for Noncertified Cargo/Baggage Containers

2008-06-22

HISTORICAL

AS1677C

This SAE Aerospace Standard (AS) covers the requirements for lower deck containers in wide body and standard body aircraft which do not require airworthiness certification under the condition of compartment restraint and/or, where applicable according to aircraft type, NAS3610 equivalent baseplate-restraint for these containers. NOTE: IATA 50/0, “Requirements for interlining of ULDs”, should also be taken into account when designing and making equipment.

Standard

GROUND EQUIPMENT REQUIREMENTS FOR COMPATIBILITY WITH AIRCRAFT UNIT LOAD DEVICES

1984-10-01

HISTORICAL

ARP1334A

Included in this document are requirements for conveyor systems, guides, stops, restraint hardware that are used on trucks, transporters, dollies, storage provisions, pallet build-up hoists, or other device-handling equipment. These requirements reflect state of the art criteria applied to known successfully operated hardware. Any design deviations shall be required to demonstrate equivalency to this specification criteria.

Standard

GROUND EQUIPMENT REQUIREMENTS FOR COMPATIBILITY WITH AIRCRAFT UNIT LOAD DEVICES

1973-11-01

HISTORICAL

ARP1334

Included in this document are requirements for conveyor systems, guides, stops, restraint hardware that are used on trucks, transporters, dollies, storage provisions, pallet build-up hoists, or other device-handling equipment. a) These requirements reflect state of the art criteria applied to known successfully operated hardware. Any design deviations shall be required to demonstrate equivalency to this specification criteria. b) These devices usually form an integral part of the aircraft and as such are subject to regulatory agencies' requirements to assure structural integrity.

Standard

GENERAL REQUIREMENTS FOR NONCERTIFIED LD-2, LD-4, AND LD-8 CARGO/BAGGAGE CONTAINERS

1995-06-01

HISTORICAL

AS1677B

This SAE Aerospace Standard (AS) covers the requirements for three sizes of compartment restrained lower deck containers (unit load devices) for the 767 airplane and which do not require airworthiness certification. NOTE: IATA Specification 50/0, General Technical Requirements and Serviceability limits, should also be taken into account when designing and making equipment according to this specification as certain provisions contained therein will also be applicable.

Standard

GENERAL REQUIREMENTS FOR NON-CERTIFIED LD-2, LD-4 & LD-8 CARGO/BAGGAGE CONTAINERS

1985-03-15

HISTORICAL

AS1677

This AS covers the requirements for three sizes of compartment restrained lower deck containers (Unit Load Devices) for the 767 airplane and which do not require airworthiness certification.

Standard

GENERAL REQUIREMENTS FOR NON-CERTIFIED LD-2, LD-4 & LD-8 CARGO/BAGGAGE CONTAINERS

1988-11-01

HISTORICAL

AS1677A

This AS covers the requirements for three sizes of compartment restrained lower deck containers (Unit Load Devices) for the 767 airplane and which do not require airworthiness certification. NOTE: IATA Specificaton 50/0, General Technical Requirements and Serviceability limits, should also be taken into account when designing and making equipment according to this Specification as certain provisions contained therein will also be applicable.

Standard

Fittings, Cargo Tiedown, Aircraft

2006-04-27

HISTORICAL

AS7092A

This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.

Standard

Fittings, Cargo Tiedown, Aircraft

2012-10-15

CURRENT

AS7092B

This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.

Standard

Fittings, Cargo Tiedown, Aircraft

1999-07-01

HISTORICAL

AS7092

This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.

Standard

Fire Resistant Container - Design, Performance and Testing Requirements

2022-12-08

WIP

AS8992A

This Aerospace Standard (AS) specifies the minimum design and performance criteria and testing methods of passive fire resistant containers (FRCs) used either: a. In those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, or b. On a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not mandate their use.

Standard

Fire Containment Cover - Operation and Use

2020-04-23

CURRENT

ARP6905

This SAE Aerospace Recommended Practice (ARP) provides guidelines for the effective operation and use of fire containment covers (FCCs). Technical Standard Orders (TSOs) C203 and C90e (and later revisions) incorporate AS6453, and provide the Minimum Performance Standards (MPS) for an FCC design. The net and pallet used with the FCC must be approved using the updated net and flammability requirements in TSO C90e and later revisions. However, fire containment performance also requires this equipment is properly used. Fire safety is compromised when FCCs are used in an inadequate manner.

Standard

Fire Containment Cover - Design, Performance, and Testing Requirements

2021-12-13

CURRENT

AS6453A

This SAE Aerospace Standard (AS) specifies the minimum design and performance criteria and testing methods of fire containment covers (FCCs) used either: a In those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, or b On a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not mandate their use.

Standard

Fire Containment Cover - Design, Performance, and Testing Requirements

2013-08-06

HISTORICAL

AS6453

This SAE Aerospace Standard (AS), identical to ISO 14186, specifies the minimum design and performance criteria and testing methods of fire containment covers (FCCs) used either: a in those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, or b on a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not mandate their use.

Standard

Effects of Hanging Loads (e.g., GOH) on ULD Performance

2024-02-01

WIP

AIR4359B

This SAE Aerospace Information Report (AIR) provides information on the subject of Air Mode containers used for transporting "Hanging Loads" such as Garment-On-Hangers (GOH), or other roof supported cargo. It suggests considerations and recommendations for roof loaded containers to transport hanging loads efficiently and safely by air and to protect the aircraft floor and cargo system from damage due to overload conditions.

Standard

Effects of Hanging Loads (e.g., GOH) on ULD Performance

2016-05-24

CURRENT

AIR4359A

This SAE Aerospace Information Report (AIR) provides information on the subject of Air Mode containers used for transporting "Hanging Loads" such as Garment-On-Hangers (GOH), or other roof supported cargo. It suggests considerations and recommendations for roof loaded containers to transport hanging loads efficiently and safely by air and to protect the aircraft floor and cargo system from damage due to overload conditions.

Standard

Effects of Hanging Loads (e.g., GOH) on ULD Performance

2013-08-12

HISTORICAL

AIR4359

This SAE Aerospace Information Report (AIR) provides information on the subject of Air Mode containers used for transporting “Hanging Loads” such as Garment-On-Hangers (GOH), or other roof supported cargo. It suggests considerations and recommendations for roof loaded containers to transport hanging loads efficiently and safely by air and to protect the aircraft floor and cargo system from damage due to overload conditions.

Standard

ENVIRONMENTAL DEGRADATION OF TEXTILES USED IN AIR CARGO RESTRAINT EQUIPMENT

1978-07-01

HISTORICAL

AIR1490

Standard

ENVIRONMENTAL DEGRADATION OF TEXTILES

1988-05-01

HISTORICAL

AIR1490A

Since the ULD device containing textiles should have a predictable service life, there should be data available so that predictions can be made. This technical report compiles available information on textiles of the types used in air cargo ULD devices and reviews the degradation characteristics of each. Textiles are used primarily in cargo restraint nets on air cargo pallets and non structural containers, restraint nets installed in cargo aircraft, and similar applications.

Standard

Drum, Metal-Shipping and Storage

2017-11-03

CURRENT

AS6054

This specification covers new cylindrical drums to be used as exterior shipping containers (see 6.1).

Standard

Drum, Metal Reusable, Shipping and Storage (Cap. from 88 to 510 Cubic Inches)

2017-11-06

CURRENT

AS6055

This specification covers the requirements for new reusable cylindrical drums consisting of body, cover, gasket, and closing device(s) to be used as interior and exterior shipping containers.